DESIGN

LEGO Technic 4×4 Mockup Truck | 4×4 mockup

คุณกำลังมองหาหัวข้อ 4×4 mockup? คุณกำลังมองหาข้อมูลเกี่ยวกับหัวข้อ LEGO Technic 4×4 Mockup Truck หรือไม่? ถ้าใช่ เชิญรับชมได้ที่นี่ครับ.

4×4 Build Ep.5 Vehicle MockUp


Latest video: https://youtu.be/nTPqPU4B1hs
Creating a layout of the offroad 4×4 utility vehicle by setting parts on the floor of my workshop and building a wooden frame for width, height and length reference. I want this vehicle to fit in a 1500x3000mm car trailer so that sets some limits to how big this vehicle actually can be. I also don’t want it to be as big as regular UTVs or SxSs so I can easily drive it around in the overgrown bush. I can barely drive a Honda Foreman Rubicon TRX500FA around in the bush without having to create new trails. :) Thanks for watching. Next episode next week. Stay tuned!

This is part of a series of a four wheel drive utility vehicle build to lessen the work load on my trusty 2002 Honda Foreman Rubicon TRX500FA. This partially answers the question “Why?” but for those who want to ask “why don’t you just buy a sidebyside instead of building one?” I just want to say I’m not made of money. Sidebysides are ridiculously expensive, even the car I drive around daily is worth less (not worthless though!), hell, it is even worth less than my 2002 Honda ATV.

“How much HP will it have?” the 1.4 litre FWD petrol engine I’m planning on using has 55 kw and this will not change, but the torque will be tripled via the BMW differentials I’m using to transfer power to front and rear axles.

“It will be too heavy!” this project just like the firewood processor project does not have to float. And a heavier vehicle will handle better anyway when hauling heavy loads.

Stay tuned for future episodes! Thanks for watching!

My other videos: www.youtube.com/DonnDIY

donndiy homemade 4×4
Soundtrack:
Pomade Silent Partner (YouTube Audio Library)

Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter

4x4 Build Ep.5 Vehicle MockUp

LEGO Technic 4×4 Mockup Truck


Join me as I show you my version of a LEGO Technic 4×4 truck/buggy.

LEGO Technic 4x4 Mockup Truck

Dental Mockup. The Key is the key


All the credit of this technique goes to our mentor Pascal Magne (USC). Thanks Dental Excellence for support.

Dental Mockup. The Key is the key

🖐🏻🥯 ◟ มาทำ mockup (artwork) ใน procreate กัน! ✦ 🥖 | llkratae


🖐🏻🥯 ◟ มาทำ mockup (artwork) ใน procreate กัน! ✦ 🥖 | llkratae

How To Make Cosmetic Jar Mockup Vol 2 | Photoshop Tutorials


In this Video, I’ll make you learn How To Create Cosmetic Jar Mockup Design in Photoshop CC.

See also  How To Create 2D Mockup For Mobile App Design | 2d mockup

I have previously Created another superior Mockup Design of Cosmetic Jar.

To Know more. Check this video

Keep Creating, Keep Learning

CosmeticJarMockupDesign CosmeticMockup JarMockup Amber

Background Music Used Here:

Song: DayFox Lioness (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: https://youtu.be/twJ_CyX9RfA

Image Used Here:

https://www.freepik.com/freepsd/floralbackgroundwithgoldennature_10308037.htm

More Loved Videos

How To Make Perfume Bottle & Packaging Mockup in Photoshop

How to Make a Jam Metal Can Mockup in Photoshop CC

How To Create Small Plastic Sanitizer Bottle in Photoshop CC

How To Create Corporate Business Card in Photoshop CC

How To Make A Custom Military Shoes Mockup in Photoshop

How to Create Sports Cap Mockup (Vanishing Point) in Photoshop CC

How To Create Mug Mock Using Smart Object in Photoshop CC

How To Create Tshirt MockUp Design Easily (StepbyStep)

How to Make a Face Mask Mockup Design in Adobe Photoshop CC

How to Create A Cool Tote Bag Mockup || Photoshop Mockup Tutorial

Realistic Helmet Wrap Design MockUp in Photoshop CC

How To Create Car MockUp Easily Using Smart Object in Photoshop

https://youtu.be/yp1vnWFVRA

How To Create 3D Pop Off Effect in Photoshop

Text Masking Effect in Photoshop Under 3 Minutes

Photoshop Tutorial: How to Create Cracked Text Effect in Photoshop

Easygoing Technique to Create Dual Lighting Effect In Photoshop

Photoshop Tutorial: How To Make Cool Glitch Text Effect in Photoshop

If you enjoyed this video, please Like, Share, and Subscribe! ► Subscribe to my channel:

https://www.youtube.com/channel/UCRLGYDWHSFgTuXWXrseVDUw?sub_confirmation=1

Don’t forget to like share and Subscribe.
You can comment us below on which you want to see next.

Copyright Disclaimer Under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Nonprofit, educational or personal use tips the balance in favor of fair use.

How To Make Cosmetic Jar Mockup Vol 2 | Photoshop Tutorials

ICON 4×4 FJ44 Radio Controlled Replica (Part 3 MOCKUP)


In PT3. MOCKUP, I take some time to show the stages of assembly, the components in the truck so far and plans for the next steps.

3D PRINT MATERIAL
LS Engine https://www.thingiverse.com/thing:1911808
Wheel Chocks https://www.thingiverse.com/thing:510393

RC COMPONENTS
Front Axle Discontinued
Well, this just proves it, if enough people show demand and you’re patient… RC4WD now offers an updated front axle with the diff housing on the correct side. May be a bit of an edit on the way.
New updated Front Axle available https://store.rc4wd.com/K44UltimateScaleCastFrontAxle_p_4782.html
Rear Axles https://store.rc4wd.com/K44UltimateScaleRearAxle_p_483.html
Engine https://store.rc4wd.com/RC4WD110V8ScaleEngine_p_4175.html
Transmission https://store.rc4wd.com/RC4WDTCIHeavyDutyR4SingleSpeedScaleTransmission_p_4173.html
Transfer Case https://store.rc4wd.com/HammerTransferCase1471_p_2214.html
Tires https://store.rc4wd.com/DirtGrabber19AllTerrainTires_p_216.html
Wheels http://www.gearheadrc.com/19wheels.htm
Rotors
Front Shocks http://www.losi.com/Products/Features.aspx?ProdID=LOSB1439
Rear Shocks http://www.losi.com/Products/Features.aspx?ProdId=LOSB1110

Thanks for watching,
STAY COOL & STAY CREATIVE
Kevin

ICON 4x4 FJ44 Radio Controlled Replica (Part 3 MOCKUP)

4×4 Build Ep.6 Tube Frame Fabrication


Latest video: https://youtu.be/nTPqPU4B1hs
Beginning of the steel tube frame / chassis fabrication.

This is part of a series of a four wheel drive utility vehicle build to lessen the work load on my trusty 2002 Honda Foreman Rubicon TRX500FA. This partially answers the question “Why?” but for those who want to ask “why don’t you just buy a sidebyside instead of building one?” I just want to say I’m not made of money. Sidebysides are ridiculously expensive, even the car I drive around daily is worth less (not worthless though!), hell, it is even worth less than my 2002 Honda ATV.

See also  How to make book mockup | Photoshop Mockup Tutorial | book mockup

“How much HP will it have?” the 1.4 litre FWD petrol engine I’m planning on using has 55 kw and this will not change, but the torque will be tripled via the BMW differentials I’m using to transfer power to front and rear axles.

“It will be too heavy!” this project just like the firewood processor project does not have to float. And a heavier vehicle will handle better anyway when hauling heavy loads.

Stay tuned for future episodes! Thanks for watching!

My other videos: www.youtube.com/DonnDIY

donndiy homemade 4×4
Soundtrack:
Pomade Silent Partner (YouTube Audio Library)

Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter

4x4 Build Ep.6 Tube Frame Fabrication

Press Conference Backdrop Banner Mockup PSD file FREE download mockup backdrop


Press Conference Backdrop Banner Mockup PSD file FREE download mockup backdrop
▬▬▬▬▬▬▬▬▬▬ ∂σωηℓσα∂ ℓιηк ▬▬▬▬▬▬▬▬▬▬▬▬▬
Download Link :
http://fumacrom.com/1XElC
▬▬▬▬▬▬▬▬▬▬ Instructions ▬▬▬▬▬▬▬▬▬▬▬▬▬
1) Extract the template File using Winrar
Password in the videos so please watch the video till the end very well it’s just few seconds 😉

2) Replace logo with your logo

3) Edit the text to your liking

4) Render and Enjoy!

Get All Templates you need For Free….

Leave a like,comment and dont forget to subscribe for more Intro Templates
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Instagram:
https://www.instagram.com/sharingtuber/

Facebook:
https://www.facebook.com/SharingTuber…

Twitter:

Behance:
https://www.behance.net/sharingtuber

Don’t forget to – LIKE | SHARE | COMMENT | SUBSCRIBE
https://www.youtube.com/channel/UC5MK…

SharingTuber Channel provide free things for graphic designing and video editing
Photoshop overlay , Photoshop action , Photoshop PSD Files , Png Frames , Photoshop Backgrounds , Photoshop Brushes , Photoshop Text Style , Photoshop Patterns , Photoshop Gradients And Much More Everything For Photoshop Only one Channel SharingTuber Go To More Easy Download

0:00 FREE PSD TEMPLATES
0:10 FREE VIDEO TEMPLATES
0:20 FREE WEB DESIGN TEMPLATES
0:30 FREE MOCKUP TEMPLATES
0:40 Don’t Forget to Subscribe | Comment | Like | Share

Thank you for Your love and support.. Please keep watching my videos. Like Comment Share
And Please keep supporting Us….👍

© 2021 SharingTuber
Tags:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
free psd file download
free graphics file
download books free
share information
sharing knowledge

freepsddownload
freemockup
download
graphics_library
graphic_design_templates
video_templates
intro_templates
after_effects_templates
graphic_design_tutorials_for_beginners
adobe
photoshop_tutorial
template_video
psd free
photoshop
illustrator
psd templates
video template
after effects
free template download
promote
psd templates free download
graphic design software
graphic school
template intro
intro template
after effects template
free intro template

Press Conference Backdrop Banner Mockup PSD file FREE download mockup backdrop

LEGO technic Toyota mockup (4K)


LEGO technic Toyota mockup (4K)

lineshaft mockup for edwardian ball 2011


Upload try2…

Just a quick mockup I did for the Edwardian Ball layout in InfiniD (4.5). I had to install Mac OSX (version4) in order to be able to run classic on my 2.5 GHz (dual) G5. It took about 12 hours to render at 1280×720 at max settings (raytracing, reflections, high antialiasing, high patch detail, 30FPS, etc). The final uncompressed quickitme is 1.56GB and looks like it’s going to take about an hour and a half to upload to youtube. It will be interesting to see how badly youtube mangles a pristine (uncompressed) input file… (postscript after all that youtube choked on it. I recompressed it with the settings they recommended MP4/H264 and it ended up at 36 MB and the result is what you see)

See also  สอนทำเส้น die-cut sticker ง่ายๆไม่ต้องเขียนเส้นเอง | FAHFAHS | เส้นลาย png

The video shows a 4×4 wooden frame (pine in the model, actually stained a darker walnut in real life) with something like 1″ to 1.5″ lineshafting with some rusty pulleys on it. A teal steam engine drives it and power is taken off the pulleys to run various accessories. I need to get to Sims and see what their solid round stock goes for and then order the pillow block bearings and 3 jaw lovejoy couplers from McMaster or ebay. Ironically, I think the wood and lineshaft part will be easy, it will be the coming up with museum quality accessories to power with this. I’m thinking sewing machine, giant fan (think horizontal axis ceiling fan) turning slowly, a generator (probably driven more directly off the engine’s frame though, so as not to put a lot of stress on the shafting. I have formulas/tables, but they recommend 11/2″ solid shafting for about 5 HP for every 100RPM. The engine is only good for about 4HP, so that shouldn’t be a problem, but I don’t know how sturdy the framework is going to be without bolting it to something solid. I may try to cheat with 1″ (actually 1.315″OD) black pipe from home depot turned down in the lathe to fit the bearings.

What else? Maybe one of Stephen’s pumpjacks, I also have a geared duplex mechanical reciprocating pump that would look cool, might even pump some water if we were ambitious. Oh, yeah, finish my wimshurst machine… maybe a small tesla coil with a tinfoil KSW logo as the output terminal, and maybe a jacob’s ladder. All cool looking, but more electricalrelated and we’re trying to go steamy/mechanical. Also, the tube lights in the drawing are reproduction Edison style bulbs powered by the generator. Note I have a 110 Volt (DC!) vintage generator at my parents house in San Diego that I’m going to bring back up after Christmas that we could use for those. That will be a nice effect, and I have some old electrical gauges and knife switches. Maybe some porcelain knobs with cloth covered wire run to them? Just ideas for now. We’ll see. There was some talk of getting a player piano, but I think that will be a lot of work (we have to get all this stuff up a set of stairs. Even with a ramp, I’m thinking weight. Again, we’ll see.)
Troye

lineshaft mockup for edwardian ball 2011

นอกจากการดูวิดีโอที่แชร์เหล่านี้แล้ว คุณยังสามารถค้นหาข้อมูลที่เป็นประโยชน์อื่นๆ ได้ที่นี่: ดูข่าวดีเพิ่มเติมที่นี่.

รูปภาพที่เกี่ยวข้องกับหัวข้อ LEGO Technic 4×4 Mockup Truck.

LEGO Technic 4x4 Mockup Truck

ดูข้อมูลที่เป็นประโยชน์เพิ่มเติมที่นี่: ดูที่นี่.

เนื้อหา เกี่ยวข้องกับ 4×4 mockup.

[vid_tags].

#LEGO #Technic #4×4 #Mockup #Truck.

หวังว่าข้อมูลนี้จะเป็นประโยชน์กับคุณ ขอแสดงความนับถือ.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button